Ampmaster SubSix Bass Dual Pickup Short scale 30″ Electric Bass Guitar|| Woodcraft electric guitars Dual Pickup

Woodcraft Electric Guitars AmpMaster SubSix 30″ Scale Metalic Red Single/Humbucker

Alder Body, Hard Rock Maple/Acacia 5 pcs. Neck with WENGE fingerboard and Metalic Red Matching headstock.

“Think like a guitar. Sound like a bass.”
The Woodcraft SubSix is a short-scale, 30” six-string instrument designed to bridge the gap between traditional bass and guitar. Tuned E to E (like a guitar, but Octave lower), it unlocks familiar chord shapes and melodic freedom—while delivering a deep, powerful low-end that only a bass-scale instrument can produce. This is not a standard Bass VI. It’s a Reimagined platform for modern players.

“Easy-Wheel” Dual Action Truss Rod and 2 pcs of Double Titanium Reinforcement Rods. All Woodcraft basses utilize Dual Truss Rods “Easy Wheel” truss rod adjustment system made from Titanium to maintain neck stiffness, stability and reduce weight. Easy Wheel allows you to make the adjustment on the spot without special wrenches.

There are a lot of basses on the market with a tendency to have weak neck binding structures due to high string tensions. For this reason, two Titanium rods are applied to all bass guitars.

TUSQ NUT: The nut is one of the most important parts of the bass that influences the performance, playability, and tone of the instrument. Depending on the quality of the material, the nut can either improve or degrade the sound. Although the TUSQ nut is more costly and harder to work with, it is considered to deliver more balanced, clearer and smoother tones than brass, corian or other materials.

ACCURATE AND STABLE TUNING: This bass comes with GOTOH/Albridge light weight tuners. Developed with accurate gear ratios, the machine heads are very reliable in tuning, Albridge

Albridge parts hand wound Split Coil Super 8 neck pickup, noise free, and a Custom wound bridge Humbucker, NO 60 cycle Hum. Push/Pull Tone control for Series/Parallel Bridge PU split

Custom wiring CTS pots with disk filter capacitor, graphite cavity shielded

Neck plate 6 holes Duralumin, light

BRIDGE: This bass comes with an ALBRIDGE parts Custom Light Weight Duralumin bridge, Air space grade with PURE Bell Bronze saddles and extra-hard tension saddle springs to eliminate annoying parasitic rattles/vibrations coming from other types of bridges. String space 16.5mm.

Fretboard Radius 12”

Fret’s width 2.8mm (0.11”)

Scale length is 30 in. (762 mm.). Weight is around 8.5 Lbs

Thank you for buying Woodcraft Electric Guitar product, North Hollywood, California U.S.A.  ASBX